Vango AirBeam Tents are a fantastic range of inflatable tents that are quick to put up and incredibly reliable too however if you should need to replace one of the AirBeam tubes then Vango have made it quick and easy to do so with their Vango AirBeam Airspeed Tubes There are different sized Vango AirBeam replacement tubes so do check the one that you need to replace to see which size you need this one is 730cm HEX How to replace an AirBeam Tube 1 Fully deflate the AirBeam reg tube to be replaced 2 Unzip the outer sleeve of the AirBeam reg on the inside of the flysheet 3 Remove the AirBeam reg from the internal zipped sleeve 4 Cut the cable tie that holds the zips together ties stop accidental opening 5 Remove the inner tube from its protective outer 6 Place the new inner tube inside the protective outer Align valve with the opening in the protective outer Zip closed taking care not to catch the inner tube Reconnect the zips together with the cable tie provided to prevent accidental opening when the AirBeam reg is inflated 7 Re-inflate AirBeam reg to the correct PSI 8 Re-insert the AirBeam reg into the zipped sleeve on the tent flysheet