Catnic Cougar Heavy Duty Open Back Cavity Wall Lintel - CH110/100 Benefits: Easy-to-use open back profile: Allows masonry to be built up continuously on both outer and inner leaf Materials used in Lintels: The CG, CH and CX ranges are formed from galvanised steel, then powder coated Duplex corrosion protection: Ensures optimum durability and longevity Built-in DPC: Saves time in construction and means cavity is easy to clean without risk of damage to DPC Integral Plaster key: With staggered slots applied to the inner flange and ribbed underside of insulation (perforated steel baseplate on CH and CX range) Continuous insulation: Maximising thermal efficiency, minimising cold bridging Product Applications: For 110-125mm Cavity, 100-115mm Inner Leaf Features: Triangulated masonry load Supporting uniformly distributed masonry load Supporting uniformly distributed timber floor and roof loads Suitable for fair faced inner leaf masonry Supports concrete floors Attic truss loads Larger span multiple truss loads Conditions of use: Nominal 150mm end bearings Both leaves are raised together One course of block prior to installation of floor/roof Standard Lengths (mm) 900-1800 1950 2250-2400 SWL 1:1/19:1 (kN) 32 48 45 Weight (kg/m) 13.1 14.6 14.6 Nominal height\'h\' (mm) 157 157 157 Notes: Standard lengths are available in 150mm increments. The SWL (safe working load) is based on the total UDL (uniform distributed load) over maximum span using 150mm end bearings. To achieve the CH & CX loading figures indicated, lintels must be built-in as illustrated, ensuring that the blockwork infill is well-jointed during construction and compatible with the strength of the masonry above. When using the Catnic CH and CX Open Back ranges with concrete floors, always ensure that the blockwork is built tight against the inner vertical face, and that a mortar joint is added to the top of the blockwork so that the floor units have an even spread over the inner flange of the lintel.