The Solar PIR Utility Light is a real game-changer for the budget end of the solar security light and solar shed light market. Look no further if you\'re looking for a compact solar sensor light for £25 that is easy to install and exceeds expectation. How does it work? During the day the solar panel charges its internal battery giving it the power it needs to light after dark. After dark the light will activate as soon as it detects motion and turns off 25 seconds after motion stops. At dawn the light stops activating and starts charging again ready for the night ahead. Using the light as a solar security light Simply position your light outside and locate the solar panel in an unobstructed location. The light will light up after dark as soon as it detects motion and turn off 25 seconds after motion stops. Using the light as a solar shed light Install your light inside your shed and position the solar panel outside in an unobstructed location (usually on top of your shed). When you enter your shed the light will light up automatically and turn off automatically 25 seconds after you leave. How waterproof is the Solar PIR Utility Light? The solar light is rated IP44 and is designed for outdoor use in locations that offer some cover and aren\'t overly exposed. Unlike cheaper imitations of this light, the solar light incorporates key upgrades which enhance waterproofing. These include a rubber collar, a rubber shield behind the back plate and a redesigned solar panel jack which creates a waterproof connection when plugged into the light. How do I install it? The Solar PIR Utility Light is very easy to install in comparison with mains powered security lights. The box contains the light unit a solar panel connected to 4.8m of cable. Before beginning your installation is worth making sure that there is a suitable solar panel location within 4.8m of where you intend to situate your light. Installation Steps - Position the solar panel and mark the holes - Drill holes, and screw panel into place - Position light within 4.8m of panel and mark holes - Drill holes and screw mounting band into place - Clip light into mounting band - Connect solar panel cable to light and turn on Box Contains - 1 x Solar PIR Utility LightInternal rechargeable battery pack - 0.6 watt solar panel connected to 4.8m of cable - 5 x screws and 5 x rawlplugs - Mounting clip - Instructions Dimensions: Light H = 130mm W = 90mm D = 130mm Solar Panel H = 190mm W = 130mm D = 70mm