DeWalt D24000 250mm Wet Tile Saw with Slide Table & Leg Stand The DeWalt D24000 250mm Wet Tile Saw with Slide Table comes complete with leg stand, cutting disc, side and rear water collector and hex key. The depth of a building tile cut with this saw ranges from 20mm to 60mm. Due to the fixed head and patented sliding bed, the D24000 is extremely easy to use. Whether rip, bevel or plunge cutting, the saw is quick and simple to adjust and extremely accurate. FEATURES Cantilevering Rail/Cart system allows for 24\" ripping capacity - 18\" tile on diagonal Stainless steel rail system is integrated into the tile saw frame, insuring accurate cuts Only 69 lbs - allows one person to transport and set up tile saw Plunge feature allows the user to make quick plunge cuts for electrical outlets and A/C registers Integrated 45/22.5° mitre feature for quick angled cuts Rear and side water attachments can be placed on tile saw to catch overspray from large tile - keeping the water in the pan Dual water nozzles can be adjusted for optimal water placement on blade in order to minimise over-spray and mist Compact tile saw frame allows for easy transport and storage in vehicle - 34\" x 26\" Removeable cutting cart for easy cleaning Powerful 1.5 HP motor will cut hard materials such as porcelain and stone 3-3/4\" depth of cut allows for cutting of V-cap and pavers 5 gallon water pan allows for quick set-up and break-down Edge Guide with 2-position 45 degree guide allows for easy line-up of corner cuts SPECIFICATION Power Input: 1600 Watts Wheel Diameter: 250 mm x 254.4 mm No Load Speed: 4200 rpm Depth of cut: 95 mm Max. Crosscut capacity at 90°: 610 mm Max. Crosscut capacity at 45°: 450 mm Weight: 32 kg Width x Length: 690 x 860mm NOISE & VIBRATION Sound Pressure: 90 dB(A) Sound Pressure Uncertainty: 3 dB(A) Sound Power: 103 dB(A) Sound Power Uncertainty: 3.1 dB(A) Hand/Arm Vibration: 2.4 m/s2 Uncertainty K 1 (Vibration): 1.5 m/s² Available In 110v & 240v