The B140-002 transmits a DVI-D Single-Link signal to two monitors up to 61 m (200-ft.) away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution use 24Awg Solid Wire Cat5e/6 cable (Tripp Lite's N202-Series). The B140-002 is compatible with all operating systems and is plug and play with no software or drivers required. It also comes with mounting hardware that allows it to be wallmounted rackmounted or pole-mounted.Installation is simple. Connect the B140-002 transmitter to a DVI source using a Tripp Lite P561-Series DVI cable (not included). Connect a Tripp Lite B140-series receiver (not included) to each display using a Tripp Lite P561-Series DVI cable (not included). Finally each remote receiver is connected to an RJ45 port on the B140-002 using a single Cat5e/6 cable.For longer extension distances use a B140-1A0 or B140-1A0-WP active receiver unit to extend a 1920 x 1080 @ 60Hz signal up to 46 m (150-ft.) or a 1024 x 768 @ 60Hz signal up to 61 m (200-ft.)For shorter extension distances use a B140-1P0 passive receiver unit to extend a 1920 x 1080 @ 60Hz signal up to 15 m (50-ft.) or a 1024 x 768 @ 60Hz signal up to 31 m (100-ft.)Further expand the range and number of monitors by using a B140-110 repeater unit. Add up to four remote units (three repeaters and one active receiver) to each channel of the B140-002 for a total of 4 displays per channel. (An active receiver should be the last unit in a channel) A 1920 x 1080 @ 60Hz signal can be extended up to 38 m (125-ft.) from each repeater to the next unit in the channel or a 1024 x 768 @ 60Hz signal can be extended up to 53 m (175-ft.) - Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz - For longer distances - Use a B140-1A0 or B140-1A0-WP active receiver unit to extend a 1920 x 1080 @ 60Hz signal up to 46 m (150-ft.) or a 1024 x 768 @ 60Hz signal up to 61 m (200-ft.) - For shorter distances - Use a B140-1P0 or B140-1P0-WP-1 passive receiver unit to extend a 1920 x 1080 @ 60Hz signal up to 15 m (50-ft.) or a 1024 x 768 @ 60Hz signal up to 31 m (100-ft.) - Use 24AWG Solid Wire Cat5e/6 cable such as Tripp Lite's N202-Series to achieve maximum distance and resolution - Can further expand the range and number of monitors by adding B140-110 repeaters - Compatible with all operating systems - Plug and play no software or drivers requiredSystem RequirementsInternational AC Adapter B110-INT required for use with UK European and Australian power connections- B140-002 DVI Over Cat5 Extender/Splitter 2-Port Local Transmitter Unit - Mounting hardware - External Power Supply with NEMA 1-15P Plug (Input: 100-240V 50/60Hz 0.5A; Output: 5V 2A 1.52 m (5-ft.) - Owner's Manual - Transmit a DVI-D Single-Link signal to two monitors up to 61 m (200-ft.) away using a single Cat5e/6 patch cable - Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz - For longer distances - Use a B140-1A0 or B140-1A0-WP active receiver unit to extend a 1920 x 1080 @ 60Hz signal up to 46 m (150-ft.) or a 1024 x 768 @ 60Hz signal up to 61 m (200-ft.) - For shorter distances - Use a B140-1P0 or B140-1P0-WP-1 passive receiver unit to extend a 1920 x 1080 @ 60Hz signal up to 15 m (50-ft.) or a 1024 x 768 @ 60Hz signal up to 31 m (100-ft.) - Use 24AWG Solid Wire Cat5e/6 cable such as Tripp Lite's N202-Series to achieve maximum distance and resolution - Further expand the range and number of monitors by using a B140-110 repeater unit - Add up to four remote units (three repeaters and one active receiver) to each channel of the B140-002 for a total of 4 displays per channel. (An active receiver should be the last unit in a channel) - A 1920 x 1080 @ 60Hz signal can be extended up to 38 m (125-ft.) from each repeater to the next unit in the channel or a 1024 x 768 @ 60Hz signal can be extended up to 53.34 m (175-ft.) - HDCP compatible - Compatible with all operating systems - Plug and play; no software or drivers required - Mounting hardware included